Product Name : Slurry ice machine,Slurry ice maker
Item# : 184437-798
Model : 184437-798
Last update : 2010.12.30
View Big Picture
-Slurry ice machine application fields:

● Aquatic products processing; ● Meat processing; ● Fishery industry
● Vegetable preservation; ● Supermarket or other commercial usage
● Cold storage project; ● Temperature reduction project

-System principle of slurry ice machine:

——Through the bottom of ice-crystal separating tank D, brine is pumped by circulating pump C into the ice maker. The pure water , contained in brine, can then either separate out ice crystal or turn into supercooled water that go back o the tank D again. Later, the supercooled water will separate out ice crystal in the ice-crystal separating tank D. Resulting from buoyancy, crystals set apart from water and distribute to the upper part of the tank D, while brine, locating below, would be pumped back to the ice maker A by ice making water circulation pump C. Repeatedly circulate.
——The ice scraper , mounted on the top of the tank D, would scrape out the ice crystals while in need. Crystals would be delivered to the ice storage tank or slurry ice reproducer, inside which the ice crystal and the water would mix and agitate, according to the pre-calculated recipe , to form slurry ice and pumped to each ice destination by slurry ice pump F.
——Salting tank B is required when using pure water or low concentration brine. Brine pump, equipped on the salting tank, will control over its operation via brine concentration sensor and controller to automatically maintain brine(in the tank D) concentration within setting range.
——When the rate of ice crystal is less demanded, ice maker A and reproducer F can be connected directly for periodic interval ice making. Ice maker will stop running when the crystal rate meeting requirement, while the slurry ice reproducer would work. The slurry ice produced would be pumped out by the slurry ice pump G. Circulation pump E, the same as circulation pump C, would circulate water.

流态冰机
流态冰机
-Advantages of slurry ice machine:

Reliable and adaptable
——From design, R&D to production, we are committed to creating stable and reliable products, which can be applied to various working conditions. SNOWKEY brine or sea water slurry ice machine would be your best choice.
Efficient heat exchange and min. salinity
——Benefit from large surface area and high heat exchange efficiency, SNOWKEY slurry ice machine requires sea water with min. salinity 0.25% . Therefore, sea water can be used directly for ice making. No need to add brine to the ice making system. It can be applied to most of the sea area, globally.
High refrigeration efficiency
——The difference between evaporating temperature and brine freezing temperature should be kept at 5~6℃ for making slurry ice, while the other types of ice require 10~13 ℃. Thus , slurry ice machine can continuously make ice fast and stable.
Hygienic standards
——SNOWKEY slurry ice evaporator and water line accessories are all both made of stainless steel SUS316L and PE material, ideal for food processing.
Superior performance
——SNOWKEY slurry ice machine can produce high-quality sea water slurry ice continuously for 24 hours a day. Only little maintenance required for long-term operation .
Compact and pumpable
——SNOWKEY slurry ice machine boasts the advantages of max. ice output and smallest installation space. Slurry ice can be pumped to any ice destination with small-diameter hoses, which reduces labour cost and avoids ice contamination. Pumpable slurry ice is ideal for small operating room, such as shipping vessel.
Flexible application and multi-function
——Stainless steel water pump, ice storage tank or agitating water tank are optional to increase the ice storing amount and meet demand from various fields.
Comprehensive solution
——SNOWKEY slurry ice machine boasts the advantages of high output, small footprint. Aquatic products are constantly maintained at low temperature when surrounded with ice from storing, transporting and processing. Assembled by solid and anti-corrosive components, SNOWKEY slurry ice machine can be applied to harsh marine environment and provide users with comprehensive and efficient solutions.

流态冰机
Vertical slurry ice machine models and parameters:
Model
SIN50W-1
SIM100W-1
SIM150W-1
SIM200W-1
Nominal refrigeration capacity
(Condensing Temperature 35℃)
9.6kw
19.2kw
27.5kw
40.2kw
8,250kcal/h
16,500kcal/h
23,600kcal/h
34,560kcal/h

Max. ice output
(Sea water temperature is 5℃)

5t/24h
10t/24h
15t/24h
20t/24h
208kg/h
412kg/h
625kg/h
833kg/h
Rated Power
4.8kw
9.2kw
13.7kw
22kw
Power system
380V/50Hz/3P
Refrigerant
R22(Optional:R404A/R507)
Ice making madie
Seawater,salt water or glycol
Min. salt content of water
0.25%NaCL
Ice water temperature
0~35℃
Cooling water inlet temperature
3m³/h
6m³/h
10m³/h
18m³/h
Condenser
Water cooling(air cooling condenser available)
Cooling water inlet temperature
25℃
Water inlet pressure
3.5bar
Compressor
Bitzer semi-hermetic reciprocating /piston compressor
Evaporator
Material:Stainless steel 316L
IP protecting grade
IP54(higher requirement is available)
Outline dimension(LXWXH)
800x800x1825
1000x1000x1825
1500x1200x1825
2000x1500x1825
Weight
550kg
850kg
1200kg
1800kg
| Clicks:1892